M16 X 2 LEFT HAND TAPER SPINDLE FOR BENCH GRINDER

75MM X 1/4 IN SHANK TAPER SPINDLE FOR DRILLM16 X 2 RIGHT HAND TAPER SPINDLE FOR BENCH GRINDER

$20.00

Tapered spindles are used to allow the fitting of polishing buffs and wheels to bench grinders and sander/polishers. 12mm internal thread. Screws onto the RHS of your 150mm (6″) bench grinder.

Qty:
Add to wishlist
Compare
SKU: TAPERSPINDLE16LHATS Category: Tag:

Description

INSTRUCTIONS FOR FITTING A TAPERED SPINDLE TO A BENCH GRINDER:

  • Step 1: Remove outer guard, grinding wheel and inner guard from the side of the machine that the tapered spindle is to be fitted to.
  • Step 2: Screw on the tapered spindle. Note: the internal thread of the spindle is counter bored to allow the spindle to cover the entire grinder shaft length.
  • Step 3: Carefully screw the buff onto the tapered spindle with the thickest flange facing inwards. Screw on as far as the buff will reasonably fit.
  • Step 4: Turn on bench grinder and the buff will tighten further against the tapered spindle.

Additional information

Weight 1 kg
Dimensions 10 × 10 × 12 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Related products